Ultrasonic cleaning is one step in a complete cleaning process. Combining ultrasonic cleaning with rinsing, drying and other processing steps in a unitized cleaning console helps assure process integrity. The addition of an automated, robotic transfer, environmental enclosure and DI water systems increases cleanliness levels and provides process consistency and significantly reduces the labor required for parts cleaning.
Aquarius™ Series Multi-tank Ultrasonic Cleaning Systems are pre-engineered to meet a wide range of parts cleaning needs at an attractive price. This platform can also be featured to handle your nitric or citric acid passivation requirements.
Typical Applications:
- Electronics
- Optical
- Semiconductor
- Medical Implants
- Aerospace Components
- Hard Disk Drive Components
- Final Cleaning
- Bio Upgrades
- Increased Hoist Load Capacities
- Data Logging
Standard Features
Cleaning Sequence: | Wash & Dry (Wash, Rinse, Etch, Passivation, and Dry Stages Available) |
Process Type: | Batch |
Part Orientation: | Standard or Custom Processing Baskets |
Production: | Low to High Volume |
Max Work Envelope: | Up to 36" Wide x 36" Deep x 36" High |
Method of Loading / Unloading: | Manual or Automatic |
Footprint: | Varies Depending on the Number of Stages |
Cleaning Mechanisms: | Immersion / Ultrasonics / Spray / Turbulation / Rotation / Agitation |
Drying Mechanisms: | High Volume, Heated Air with HEPA Filtration and or vacuum drying |
Controls: | Programmable Controller & HMI Touch Screen or PC |
Ultrasonic Frequency | 40kHz (3 or 7 frequency systems optional) |
Optional Equipment
- multiSONIK Multi-Frequency Ultrasonics-3 or 7 Frequency
- In-Tank Agitation
- Solution Sensors-Conductivity / PH / Specific Gravity
- Chemical Injection
- Cascading Rinse Tanks
- Environmental Enclosure
- HEPA Air Filtration
- Tank Ventilation System
- Auto Tank Lids
- Increased Hoist Load Capacities
- Data Logging
- multiSONIK Multi-Frequency Ultrasonics-3, or 7 Frequency